os: Operating system functionality

Table of content

Introduction

The os: module provides access to operating system functionality. The interface is intended to be uniform across operating systems.

The builtin module also contains some operating system utilities. The unix: module contains utilities that are specific to UNIX operating systems.

Function usages are given in the same format as in the reference doc for the builtin module.

Some commands take an &follow-symlink option, which controls the behavior of the command when the final element of the path is a symbolic link:

  • When the option is false (usually the default), the command operates on the symbolic link file itself.

  • When the option is true, the commands operates on the file the symbolic link points to.

As an example, when l is a symbolic link to a directory:

  • os:is-dir &follow-symlink=$false l outputs $false, since the symbolic link file itself is not a directory.

  • os:is-dir &follow-symlink=$true l outputs $true, since the symlink points to a directory.

Variables

$os:dev-null

OS-specific path to the “null” device: /dev/null on Unix and NUL on Windows.

$os:dev-tty

OS-specific path to the terminal device: /dev/tty on Unix and CON on Windows.

Functions

os:-is-exist

os:-is-exist $exc

Reports whether an exception is caused by the fact that a file or directory already exists.

os:-is-not-exist

os:-is-not-exist $exc

Reports whether an exception is caused by the fact that a file or directory does not exist.

os:chmod

os:chmod &special-modes=[] $perm $path

Changes the mode of the file at $path to have permission bits set to $perm and special modes set to $special-modes.

The permission bits follow the numeric notation of Unix permission, but note Elvish requires a 0o prefix for octal numbers (unprefixed numbers like 444 are interpreted as decimal instead). On Windows, only the 0o200 bit (owner writable) is used; clearing it makes the file read-only. All other bits are ignored.

The special modes should be specified as a list, with elements being one of setuid, setgid or sticky.

If the file is a symbolic link, this command always on the link’s target.

Example:

~> touch file
~> printf "%o %v\n" (os:stat file)[perm special-modes]
644 []
~> os:chmod &special-modes=[sticky] 0o600 file
~> printf "%o %v\n" (os:stat file)[perm special-modes]
600 [sticky]

os:eval-symlinks $path

Outputs $path after resolving any symbolic links. If $path is relative the result will be relative to the current directory, unless one of the components is an absolute symbolic link. This function calls path:clean on the result before outputting it. This is analogous to the external realpath or readlink command found on many systems. See the Go documentation for more details.

~> mkdir bin
~> ln -s bin sbin
~> os:eval-symlinks ./sbin/a_command
▶ bin/a_command

os:exists

os:exists &follow-symlink=$false $path

Reports whether a file is known to exist at path.

See follow-symlink for an explanation of the option.

os:is-dir

os:is-dir &follow-symlink=$false $path

Reports whether a directory exists at the path.

See follow-symlink for an explanation of the option.

~> touch not-a-dir
~> os:is-dir not-a-dir
▶ false
~> os:is-dir /tmp
▶ true

See also os:is-regular.

os:is-regular

os:is-regular &follow-symlink=$false $path

Reports whether a regular file exists at the path.

Note: Some other languages call this functionality something like is-file; that name is not chosen because the name “file” also includes things like directories and device files.

~> touch not-a-dir
~> os:is-regular not-a-dir
▶ true
~> os:is-regular /tmp
▶ false

See also os:is-dir.

os:mkdir

os:mkdir &perm=0o755 $path

Creates a new directory with the specified name and permission (before umask).

os:mkdir-alladded in 0.21

os:mkdir-all &perm=0o755 $path

Creates a new directory at the named path along with any necessary parents. The permission bits is used for all new directories to create. If the named path is already a directory, does nothing.

os:remove

os:remove $path

Removes the file or empty directory at path.

If the path does not exist, this command throws an exception that can be tested with os:-is-not-exist.

os:remove-all

os:remove-all $path

Removes the named file or directory at path and, in the latter case, any children it contains. It removes everything it can, but returns the first error it encounters.

If the path does not exist, this command returns silently without throwing an exception.

os:renameadded in 0.21

os:rename $oldpath $newpath

Renames file at $oldpath to $newpath. If $newpath already exists and is a file, it will get replaced.

OS-specific restrictions may apply when $oldpath and $newpath are in different directories. On non-Unix platforms, this is not an atomic operation even within the same directory.

os:stat

os:stat &follow-symlink=$false $path

Describes the file at path by writing a map with the following fields:

  • name: The base name of the file.

  • size: Length in bytes for regular files; system-dependent for others.

  • type: One of regular, dir, symlink, named-pipe, socket, device, char-device and irregular.

  • perm: Permission bits of the file following Unix’s convention.

    See numeric notation of Unix permission for a description of the convention, but note that Elvish prints this number in decimal; use printf with %o to print it as an octal number.

  • special-modes: A list containing one or more of setuid, setgid and sticky to indicate the presence of any special mode.

  • sys: System-dependent information:

    • On Unix, a map that corresponds 1:1 to the stat_t struct, except that timestamp fields are not exposed yet.

    • On Windows, a map that currently contains just one field, file-attributes, which is a list describing which file attribute fields are set. For example, if FILE_ATTRIBUTE_READONLY is set, the list contains readonly.

See follow-symlink for an explanation of the option.

Examples:

~> echo content > regular
~> os:stat regular
▶ [&name=regular &perm=(num 420) &size=(num 8) &special-modes=[] &sys=[&...] &type=regular]
~> mkdir dir
~> os:stat dir
▶ [&name=dir &perm=(num 493) &size=(num 96) &special-modes=[] &sys=[&...] &type=dir]
~> ln -s dir symlink
~> os:stat symlink
▶ [&name=symlink &perm=(num 493) &size=(num 3) &special-modes=[] &sys=[&...] &type=symlink]
~> os:stat &follow-symlink symlink
▶ [&name=symlink &perm=(num 493) &size=(num 96) &special-modes=[] &sys=[&...] &type=dir]

os:symlink $oldname $newname

Creates $newname as a symbolic link to $oldname.

It is not an error if $oldname doesn’t exist. However, on Windows, doing this will create $newname as a file symlink, so if $oldname is later created as a directory it will not work.

os:temp-dir

os:temp-dir &dir='' $pattern?

Creates a new directory and outputs its name.

The &dir option determines where the directory will be created; if it is an empty string (the default), a system-dependent directory suitable for storing temporary files will be used. The $pattern argument determines the name of the directory, where the last star will be replaced by a random string; it defaults to elvish-*.

It is the caller’s responsibility to remove the directory if it is intended to be temporary.

~> os:temp-dir
▶ /tmp/elvish-RANDOMSTR
~> os:temp-dir x-
▶ /tmp/x-RANDOMSTR
~> os:temp-dir 'x-*.y'
▶ /tmp/x-RANDOMSTR.y
~> os:temp-dir &dir=.
▶ elvish-RANDOMSTR
~> os:temp-dir &dir=/some/dir
▶ /some/dir/elvish-RANDOMSTR

os:temp-file

os:temp-file &dir='' $pattern?

Creates a new file and outputs a file object opened for reading and writing.

The &dir option determines where the file will be created; if it is an empty string (the default), a system-dependent directory suitable for storing temporary files will be used. The $pattern argument determines the name of the file, where the last star will be replaced by a random string; it defaults to elvish-*.

It is the caller’s responsibility to close the file with file:close. The caller should also remove the file if it is intended to be temporary (with rm $f[name]).

~> var f = (os:temp-file)
~> put $f[name]
▶ /tmp/elvish-RANDOMSTR
~> echo hello > $f
~> cat $f[name]
hello
~> var f = (os:temp-file x-)
~> put $f[name]
▶ /tmp/x-RANDOMSTR
~> var f = (os:temp-file 'x-*.y')
~> put $f[name]
▶ /tmp/x-RANDOMSTR.y
~> var f = (os:temp-file &dir=.)
~> put $f[name]
▶ elvish-RANDOMSTR
~> var f = (os:temp-file &dir=/some/dir)
~> put $f[name]
▶ /some/dir/elvish-RANDOMSTR